Intellinet-network 524445 User Manual Manual do Utilizador descarregar pdf (Página 29)

SYSTEM & NETWORK SETUP

Subnet Mask — Enter the subnet mask for this network.

802.1d Spanning Tree — Select “Enable” or “Disable” from the drop-down menu.

DHCP Server — Select “Enable” or “Disable” from the drop-down menu.

2.6.2 DHCP Server

These settings are only available when “DHCP Server” in the LAN IP section is

enabled, but will also affect wireless clients.

Lease Time — Choose a lease time (the duration that every computer can keep a

specic IP address) from the drop-down menu of every IP address assigned by

this router.

Start IP — Enter the start IP address of the IP range.

End IP — Enter the end IP address of the IP range.

Domain Name— Enter a domain name for your network. (optional)

NOTE: The number of the last eld (the “d” eld) of “End IP” must be greater than

“Start IP” and can’t be the same as the router’s IP address. Also, the rst three

elds of the IP address of “Start IP,” “End IP” and “IP Address” in the LAN IP

section (the “a,” “b” and “c” elds) should be the same.

RECOMMENDED VALUES

IP Address: 192.168.2.1

Subnet Mask: 255.255.255.0

802.1d Spanning Tree: Disabled

DHCP Server: Enabled

RECOMMENDED VALUES

Lease Time: Two Weeks (or “Forever” if

you have fewer than 20 computers)

Start IP: 192.168.2.100

End IP: 192.168.2.200

Domain Name: (leave it blank)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 69 70

Sem comentários

Intellinet-network 524445 User Manual Manual do Utilizador Página 29